This has been our speciality for many years, so when you choose our services, you do not need to worry about the quality of the products supplied and their installation.
Exterior roller shutters can be installed in a house or building that has already been built; however, a better decision is to install them during construction. There are several arguments in favour of such a solution. The most important would be the issue of aesthetics. If you decide to install the roller shutters at the start of the construction, you will be able to install a roller shutter box which will be completely invisible.
Sometimes, however, it is not possible to decide on the installation of roller shutters during the construction phase. Quite a few people only decide to install roller shutters after some time. At this point, there are two options to choose from: standard roller shutters or flush-mounted roller shutters.
When the house or building is not plastered, we can use a flush-mounted box, but this involves shoring up the lintel. The next step is to decide where the roller shutters will be mounted - inside the window recess or on the wall. The final step is to choose the control system and colour.
At this point, it is possible to order a ready-made roller shutter that has been manufactured to a specific size.
This system is designed to be built-in - the box is completely invisible from the outside after installation. The RNK/E variant is available in three heights: 175 mm, 200 mm and 205 mm, all boxes are also available with a roll- up mosquito net, which can also be added after installation and treatment. In this system it is possible to use both MINI and MAXI lamellas.
The system has insulated sides and is compatible with all aluplast profile systems and other manufacturers of PVC, aluminium and timber window systems up to a frame depth of 90 mm. The system meets the requirements of the EnEV 2014 standard.
RNS roller shutters are available in three heights: 155 mm, 181 mm and 220 mm, in designs with or without an integrated mosquito net. In addition, for the roller blind variant with a box height of 220 mm, it is possible to manufacture the roller blind in the G version - a deep version with increased thermal input.
The RNS system is compatible with all profile systems from aluplast and other manufacturers of PVC, aluminium and timber window systems. NOTE: Does not comply with EnEV 2014 standards!
This system is designed to be built-in - the box is completely invisible from the outside after installation. The RNK/XT variant is available in two heights 165 mm and 185 mm, each of which can be fitted with a roll-up mosquito net. In this system it is possible to use only MINI lamellas.
The system has insulated sides and is compatible with all aluplast profile systems and other manufacturers of PVC, aluminium and timber window systems up to a frame depth of 90 mm. The system meets the requirements of the EnEV 2014 standard.
This system is highly configurable, as the double-sided front profile allows the roller-shutters to be built in or unbuilt. The RNK/B variant is available in three heights of 165, 205 and 245 mm (depth 255 mm) to accommodate various window and door sizes. The reinforcement of the roller shutter box and the consoles ensures stability for very large dimensions.
The adaptive profile allows the roller shutter to be fitted on every PVC, wooden and aluminium window, and the various insulations of the roller shutter box allow it to be optimally adapted to the climatic conditions in the target place of installation and use. The production of the PVC elements of the system is based on environmentally friendly lead-free stabilisers.
This adaptive roller shutter system is designed for built-in. The construction is entirely made of aluminium (box, sides, guides). The lower part of the box is available in a wide range of RAL colours.
A finish in golden oak, walnut, dark oak and winchester veneers is also available.
For this reason, it cannot be plastered over - the box is completely visible from the outside after installation. This variant allows roller shutters with the largest dimensions to be made. The RAS variant is available in six heights: 125 mm, 137 mm, 150 mm, 165 mm, 180 mm and 205 mm, of which the boxes in heights of 150 mm, 165 mm, 180 mm and 205 mm are also available with a rolling mosquito net.
The shutter drive exit is possible at the three positions A, B and C indicated in the drawings below, depending on the type of installation adopted. The roller shutter height H is equal to the roller shutter depth B.
The RAR variant is available in four heights 137 mm, 165 mm, 180 mm and 205 mm, of which the 165 mm, 180 mm and 205 mm high boxes are also available with a rolling mosquito net. The shutter drive exit is possible in two places, depending on the type of installation adopted. The roller shutter height H is equal to the roller shutter depth B.
The most popular aluminium profile. It is characterised by its small width and slim shape. It winds very well and fits easily into small boxes. Thanks to its low weight, both manual, spring and electric drive can be used.
Visible slat width - 39mm, thickness 9mm
Max. width - 3300mm
Max. building surface - 6m2
A profile used in window blinds, door recesses or small shop windows. It is a stronger profile, with a thicker wall and greater height, which improves stability. In addition, thanks to its good winding diameters, small sized boxes can be used. The low weight allows the use of drives - manual, spring or electric.
Visible slat width - 45mm, thickness 9mm
Max. width - 3000mm
Max. building surface - 6.5m2
The PA 52 aluminium profile is used in roller shutters characterised by large widths. Thanks to its robust construction, the profile exhibits high rigidity while maintaining a neat and proportionate appearance. The profile is quite lightweight. Drives can be used - manual, spring or electric.
Profile PA 52Profile width - 52mm, thickness 13mm
Max. width - 4600mm
Max. building surface - 8m2
The PE 41 extruded profile is generally used in buildings where the emphasis is on safety features and colour. It has very good strength properties. The relatively high weight requires the use of an electric drive.
Visible slat width - 41mm, thickness 8.5mm
Max. width - 5900mm
Max build-up area - 8.5m2
We also offer PA 37 and PA 55 profiles
Colours of roller shutter profiles: silver, white, grey, dark beige, brown, dark brown, cream white, ivory, black, anthracite grey, mahogany, walnut, golden oak and many others.
Colours of boxes and tracks: grey, silver, white, brown, dark brown, walnut, mahogany, golden oak and according to RAL palette.
We have traditional 45° boxes as well as round and semicircular boxes: SK, SKP, SKO.
Are you interested in our offer?
Use our contact form to find out more.
